Mitsubishi also needs to install the corresponding plc driver, the programming software comes with it.
The USB driver file needs to manually specify the installation path for the first time. The file is in X:\MELSOFT\GX Developer\Easysocket\USBDrivers
X represents the drive letter of the programming software installation. The most important is under the Easysock\USBDrivers path.
Category: how to
How to set up Mitsubishi software FxGpWiN and pLc cable
1. First connect the Mitsubishi PLC to the computer with a communication line.
2. Right click on “My Computer” and select “Manage”.
3. In the Computer Management window that pops up, select Device Manager.
4. Check the Com port used by the communication line and remember this port. The example is Com10.
5. Return to the PLC programming software, select the “Online” menu bar and select “Transfer Settings” from the drop-down menu.
6, in the “Transfer Settings” dialog box, you need to set the “Serial USB” interface
7, then set the Com port to Com10 in the pop-up port settings interface.
8. Finally click on “Communication Settings”. If the connection to the PLC is successful, click OK and write the program to PLc.
How does the Mitsubishi PLC use the USB interface data cable to connect to the computer?
1. Install the USB communication line driver.plc driver
2. In the computer device manager port, check the port number actually occupied by the USB communication line.
3. Set the port number in the programming software communication settings to the port number actually occupied by the USB communication line.
4. Go online.
PLC Cable 