The difference between Mitsubishi PLC programming line USB-SC09 and USB-SC09-FX is:
1. USB-SC09-FX is only used for Mitsubishi FX series, and USB-SC09 is used for Mitsubishi FX series and A series.
2, USB-SC09-FX technology price is 140/10PCS, USB-SC09 technology price is 150/10PCS.
3. The USB-SC09-FX cable has a length of 2.5 meters and the USB-SC09 cable has a length of 3.0 meters.
Tag: usb-sc09-fx
How many pin data lines are used in the Mitsubishi plc fx series jacks?
8-pin round S-terminal, but only 4 pins are actually used inside.
What cable can the Mitsubishi FX-2n series PLC use to connect to the computer?
Mitsubishi plc programming cable, generally use usb-sc09
Mitsubishi PLC and computer USB connection can not communicate ES:01802007
1, the corresponding USB driver is not installed.
2; the reason for the line.
3; communication port selection settings.
To use a line with two integrated blocks, there is a crystal inside, otherwise it cannot communicate with the PLC.
What is the programming cable model of Mitsubishi FX series PLC?
The programming cable type of the FX series PLC is SC-09 cable or USB-SC09-FX cable.
SC-09 is used to connect to the computer serial port. USB-SC09-FX is connected to the computer USB port
Mitsubishi plc programming software v8.86 what programming cable
Mitsubishi plc programming software uses the SC09 serial cable or the USB-SC09 cable.
How to set up the communication port of Mitsubishi PLC programming software? I just set up the COM number. I just bought a Mitsubishi PLC program download line USB interface.
You should check the port number of your USB programming cable that is visualized in the port of the hardware manager, such as COM8, then set it to COM8 in the programming software.
In general, COM4 or above will be visualized on the notebook, and COM6 or above will be visualized on the desktop.
Why does Mitsubishi fx not use rs422 instead of rs232
The programming port of the FX1S (8-pin round port) is RS422 serial communication.
Use of usb-sc09-fx communication cable and click “RS-232”.
The COM port should choose the COM port that the communication cable actually occupies.
RS232, RS422, RS485 are distinct serial communication formats.
The computer is RS232 (DB9 pin) communication, the general notebook uses USB,
Can USB-RS422 connect directly to the PLC?
I use the Mitsubishi FX series PLC and the computer of Tsinghua Tongfang Fengrui 42A. I bought a USB-SC09-FXUSB-RS422 cable and also brought a CD. I installed it but could not communicate with the PLC.
It should work well, this cable 422 port has MD8M plug, plug in the PLC communication port, set the communication parameters to download the program (FX series PLC). Note that the local cable should be set to connect local connection to USB.
That is, parameters such as the baud rate should be set the same. Is that your local connection is the default one of the COM ports, and you select USB.
Cannot write the program on the PLC with GX develop. The COM port is wrong. The connection port is no problem. The connection is USB-SC09-FX-AW.
This data line is a USB-RS422 communication line. To use the basic settings, first install the driver of USB-SC09-FX-AW, then set the virtual serial port in the hardware, and the GX develop software. The serial port number setting is the same ones.
FX-USB-AW Suitable Mitsubishi FX3U 3G 1N 2N 1S Series PLC Programming Cable
FX-USB-AW
Interface Type: USB- Round 8pin
Working Temperature: -20-70degree
Cable Length: 2.5M
Warrenty: 1Year
USB-SC09 Suitable Mitsubishi FX/A Series PLC Programming Cable
- Interface:USB + Round 8-pin + 25-pin serial por
- Support system: WIN2000 / WINXP / WIN7 / WIN8
- Purpose: USB-SC09+ built-in isolation chip Programming Cable suitable Mitsubishi FX&A Series PLC Download cable
PLC Cable 