Tag: usb-sc09-fx driver

Why is the USB-SC09-FX data cable for Mitsubishi FX1N-24MR PLC not connected?

~ arcozhang ~ Leave a comment

After installing the driver, plug in the programming line, right click “My Computer” – “Properties” – “Hardware” – “Device Manager” – you will see “Port (COM and LPT)” in the open Device Manager window Open “Port (COM and LPT)” and you will see the COM port occupied by your programming line.

Open Mitsubishi programming software GX Developer, click menu “Online” – “Transfer Settings”, select RS-232 (not USB) in the “PC I/F” of the transfer setting, COM port is the COM port occupied by the programming line, transfer Speed is optional (default is 9600 in device management). Confirm

Is the FX3u and FX2n programming cable shared? Is it SC09?

~ arcozhang ~ Leave a comment

Support
The SC-09 programming cable is a conversion cable from the RS232 interface (commonly known as a COM port) to RS422 interface. It is commonly used in Mitsubishi A series and FX series (FX2/FX2C/FX2N/FX0/FX0N/FX0S/FX1N/FX1S…) PLC, support All communication protocols, for computer-to-PLC programming communication and various PC monitoring software, and can replace the Mitsubishi communication module FX-232AW (or FX-232AWC), the RS422 port and RS232 port of the cable have built-in ± 15kVESD protection circuit , can be charged and plugged in any way.
If you are communicating with a Mitsubishi F1/F2 series PLC, you need to install the F2-20GF1 communication module.
If your computer uses a USB port, please use the USB interface programming cable USB-SC09.
The main technical parameters:
• Both the RS422 port and the RS232 port have a 15kVESD protection circuit that can be plugged and unplugged at any time.
• Baud rate: 0 to 230kbps adaptive
• Cable length: 3 m, fully shielded, with ground wire
• With communication indicator, LED flashes during communication
• Operating temperature: -20 ~ 75 ° C