1. Right-click on the blank space on the desktop, and the “All Apps” option will pop up below the desktop. Left click on “All Apps”.
2. Left click on “Control Panel”.
3. The second type enters the “Control Panel” method. Press the “Windows” and “X” keys on the keyboard at the same time and click “Control Panel”.
4. Left click on “Hardware and Sound”.
5. Left click on Device Manager.
6. Left-click on the device class to be updated, right-click the device name, and left click on “Update Driver Software”.
7, update the driver can choose to automatically update online and manually specify the driver location update, select automatic update below.
8, the system will automatically find matching driver installation online.
9, update the driver can choose online automatic update and manually specify the drive location update, the following choose to manually specify the drive location update.
10. Click “Browse”.
11. Select the drive location directory and click OK.
12. Click “Next”, the system will automatically install the selected driver, and the installation steps are completed.
Step 10, please select the directory where the device driver is located according to the actual situation.
Tag: usb-sc09 driver
USB-sc09 is connected to the computer and PLC, the driver is installed, how can I not connect?
USB-SC09 is the programming cable of Mitsubishi PLC. Before using it, you must first install the driver of the programming cable. After the installation driver is finished, you need to make a simple setting.
The setting method is as follows.
1. Right click (My Computer) and click Properties. The (System Properties) dialog box is displayed, select the hardware, and click (Device Management).
2. Select (port), find the USB port you installed, right click to display (property) click, display the property dialog bar, select (port setting) to set the COM port of the advanced setting in this dialog box to be the PLC programming software. The settings in it are the same.
3, the baud rate setting problem needs to be consistent with the baud rate of the PLC.
Of course, hardware problems or computer USB interface problems will also be caused.
How does usb-sc-09 communicate with Mitsubishi 3U series PLC?
Mitsubishi PLC and computer programming software communication connection method.
1) The usb-sc-09 communication line driver must be installed.
2) Open the programming software, power on the PLC, connect the communication line,
3) Check the COM port number occupied by the communication line in the port bar of the Computer Device Manager.
4) Set the COM port number in the software online → transmission settings to the COM port number actually occupied by the communication line, and click OK.
5) In the software online → select plc write or plc read as needed.
How to realize the communication connection between Mitsubishi FX1S series PLC and computer?
The USB-SC09 is a programming cable for Mitsubishi PLC. The driver for the programming cable must be set up before use.
After the installation driver is finished, make a simple setup.
The setting method is reproduced below. Right click (My Computer) and click Properties. The (System Properties) dialog box is shown, select the hardware, and click (Device Management).
Select (port), find the USB port you installed, right click to display (property) click, display the property dialog bar, select (port setting) to set the COM port of the advanced setting in this dialog box to be in the PLC programming software. The settings are the same ones.
Usb-sc09 driver supports win8?
1. Right-click on the blank space on the desktop, and the “All Apps” option will be displayed below the desktop. Left-click on “All Apps”.
2. Left-click on “Control Panel”.
3. The second type gets into the “Control Panel” method. Press the “Windows” and “X” keys on the keyboard at the same time and click “Control Panel”.
4. Left-click on “Hardware and Sound”.
5. Left-click on Device Manager.
6. Left click on the device class to upgrade, right-click the device name, and left click on “Update Driver Software”.
7, upgrade the driver can choose to automatically update online and manually specify the driver location update, select automatic update below.
8, the system will automatically find matching driver installation online.
9, update the driver can choose online automatic update and manually specify the driver location update, the following chooses to manually specify the driver location update.
10. Click “Browse”.
11. Select the drive location directory and click OK.
12. Click “next”, the system will automatically install the selected driver, and the installation steps are completed.
Step 10, please select the directory where the device driver is placed according to the actual situation.
PLC Cable 