The PPI is used on the 200PLC and downloaded. USB-MPI is for 300 and 400 PLC
Tag: Cheap mpi adapter
Problems when installing the Siemens PLC S7-300USB/MPI programming cable driver
Installation of Siemens PLC S7-300 USB/MPI programming cable When driving, the driver is pre-installed successfully! Plug in the device and select Auto Install in the “Found New Hardware Wizard” dialog box that pops up, ignoring the driver digital signature warning. I clicked (OK), after plugging in the USB cable, the SIMATIC PC Adapter USB still displays a yellow question mark in the device manager and cannot be installed.
Plug the cable first, then open the location of the driver to install, pay attention, which usB port is installed, you need to restart, close the anti-virus software
Siemens PLC Programming Cable S7-200 PLC Data Line
USB-PPI
●SupportS7-200 full series of PLC communication
●Support PPI multi master communication
●The highest baud rate reached 187.5kb
● Driver: no need to install driver, can be generated USB directly.
● System:Support Win7 (32/64bit)
● Full set: Packaging box+ Adapter(include wire)
USB-PPI Programming Cable USB to RS485 Adapter
USB-PPI
Suitable Siemens S7-200 PLC programmign Cable USB-PPI communication Cable Down load
SMART700/1000/TP-FX Suitable Siemens Smart 700 1000IE HMI Connect Mitsubishi FX Series PLC Programming Cable
SMART700/1000/TP-FX
Suitable SMART700/1000IE Series Touch Panel
Connect Mitsubishi FX Series Cable
USB-MPI DP PPI for Siemens S7-200/300/400 PLC Programming Cable
USB-MPI
Suitable Siemens S7-200/300/400 series PLC Programming Communication Amsamotion Network version MPI programming cable apply optocoupler isolation protection. Protect the circuit also resist the external interference, protect the communication quality. Support MPI, PPI, DP interface programming. Automactically meet the baud rate.
USB-PPI Suitable Siemens S7-200 PLC programming Cable
USB-PPI
USB-PPI Suitable Siemens S7-200 PLC programming Cable USB PPI Communication Cable 6ES7 901-3DB30-0XA0 Download Line
USB-LOGO Isolated For Siemens LOGO Series PLC programming cable
USB-LOGO
Model:LOGO!PC-CABLE/LOGO!USB-CABLE
PC-CABLE:
PC side is 9pin female plug RS232port, PLC Side 6pin square shape
USB-CABLE:
USB port connect PC, PLC Side 6pin square shape.
USB-LOGO cable remove the 1st generation heavy adapter appearance and apply the new design with the high-speed communication micro integrated chip buit-in 6pin square shape port side. It is more protable and founction more stable &powerful.
Siemens S7-200/300/400 PLC Programming Cable 6ES7972-0CB20-0XA0 USB-MPI
6ES7972-0CB20-0XA0 USB-MPI
Model: 0CB20 compatible 6ES7 972-0CB20-0XA0
Support: Siemens S7-200/300/400PLC
Support system: WIN7(32/64 Bit)/XP/VISTA
Support Touch Pannel: TP170/177/270/OP25/35/77/MP177/270/277B
Cable Length: 4.5m
Packaging: 2pieces of cable+Adapter+ Box (No driver need)
Character:Support S7-200/300/400 plc communication cable. Isolated cable with good quality, support 300 /400series Long time monitoring with the communication more stable, resist the external interference more outstanding.