The difference between Mitsubishi PLC programming line USB-SC09 and USB-SC09-FX is:
1. USB-SC09-FX is only used for Mitsubishi FX series, and USB-SC09 is used for Mitsubishi FX series and A series.
2, USB-SC09-FX technology price is 140/10PCS, USB-SC09 technology price is 150/10PCS.
3. The USB-SC09-FX cable has a length of 2.5 meters and the USB-SC09 cable has a length of 3.0 meters.
Tag: usb-sc09
How many pin data lines are used in the Mitsubishi plc fx series jacks?
8-pin round S-terminal, but only 4 pins are actually used inside.
How to realize the communication connection between Mitsubishi FX1S series PLC and computer?
The USB-SC09 is a programming cable for Mitsubishi PLC. The driver for the programming cable must be set up before use.
After the installation driver is finished, make a simple setup.
The setting method is reproduced below. Right click (My Computer) and click Properties. The (System Properties) dialog box is shown, select the hardware, and click (Device Management).
Select (port), find the USB port you installed, right click to display (property) click, display the property dialog bar, select (port setting) to set the COM port of the advanced setting in this dialog box to be in the PLC programming software. The settings are the same ones.
What cable can the Mitsubishi FX-2n series PLC use to connect to the computer?
Mitsubishi plc programming cable, generally use usb-sc09
Mitsubishi PLC and computer USB connection can not communicate ES:01802007
1, the corresponding USB driver is not installed.
2; the reason for the line.
3; communication port selection settings.
To use a line with two integrated blocks, there is a crystal inside, otherwise it cannot communicate with the PLC.
What is the programming cable model of Mitsubishi FX series PLC?
The programming cable type of the FX series PLC is SC-09 cable or USB-SC09-FX cable.
SC-09 is used to connect to the computer serial port. USB-SC09-FX is connected to the computer USB port
Mitsubishi plc programming software v8.86 what programming cable
Mitsubishi plc programming software uses the SC09 serial cable or the USB-SC09 cable.
USB-SC09 Suitable Mitsubishi FX/A Series PLC Programming Cable
- Interface:USB + Round 8-pin + 25-pin serial por
- Support system: WIN2000 / WINXP / WIN7 / WIN8
- Purpose: USB-SC09+ built-in isolation chip Programming Cable suitable Mitsubishi FX&A Series PLC Download cable